IMMERSION HEATERS FOR NON FERROUS METALS
The 55mm / 2,16” immersion heater Supratherm55 offers a power up to 45 kW.
It has been specifically designed to maintain or increase temperature of aluminium in large capacity furnaces.
Concentrating strong powers on small heating lengths answers the need of power in furnaces having reduced bath foot, when limited place doesn’t allow the installation of several supratherm heaters 28/32.
It is composed of a Nickel-Chromium resistance inserted into a high performing insulator conducting heat, the whole is fitted
in a ceramic sheath directly immersed into the liquid metal.
Heating directly into heart of metal guaranties an improved aluminium quality with no over heated areas and nearly no corundum.
|Power||Up to 45kW|
|Power supply||From 220V mono to 440V tri, up to 600V also available|
|Heating Length||Up to 650mm / 25,6”|
|Sheath Length||Up to 1400mm / 55,1”|
|Average life time||Over 13 months|
up to 40%
from 3 hours to less than 1 hour
Liquid metal quality improvement :
no overheating, less dross
accuracy +- 2°C
Environment friendly :
No CO2 emmissions